Medical Part Ultrasonic Cleaning Rinsing With Filters + Drying Tank For Medical Needles / Cannul

Medical Part Ultrasonic Cleaning And Passivation Tanks + Rinsing With Filters + Drying Tank For Medical Needles / Cannulae

Hospitals and other medical facilities contain a wide variety of tools and equipment that must be maintained in a completely sanitary or sterile condition. This is a critically important factor not only for patient wellness and recovery, but for the safety of both the patients and staff. While maintaining such environments has always been challenging, incomplete or improper cleaning can result in residual contamination leaving patients and staff exposed to viruses, bacteria, and other pathogens (such as MRSA). In recent years this has become a critical healthcare issue.

AG Ultrasonic Cleaning Systems have been used successfully in the cleaning and maintaining of medical facilities.With AG Ultrasonics, equipment can be cleaned quickly and thoroughly. Additionally, our systems have been proven to eradicate the most resistant bacteria including Escherichia coli, Enterococcus, H1N1, MRSA and C-diff.

Conclusions

In every case of testing, the AG Ultrasonic Cleaning Systems and process proved to be extremely effective at reducing the bacterial level of contamination for a wide variety of objects.For both Enterococcus and Escherichia coli, lab results revealed a 100% reduction for every non-porous item tested, a 97% reduction in Enterococcus and a 100% reduction of E. colifor porous items such a microfiber cleaning towel.

MRSA bacteria were completely eliminated from all contaminated surfaces. The results also conclusively proved that AG Ultrasonic Cleaning Equipment can be used to clean items with substantial bacterial contamination (and this was accomplished without having to frequently change the water in the cleaning tank). Special waste disposal requirements were also not necessary for the wash water after items with bacterial contamination had been cleaned.

Why Clean Stainless Steel Round Tube with Ultrasonics?

Delivering and using clean parts is not always obvious. Certainly, no one wants to handle a dirty part or install it into a critical machine, but dirt, debris and contaminants can cause problems for manufacturers and end users. From the merely frustrating to catastrophic, dirty parts can cause critical components to exceed tolerances and even fail damaging valuable equipment and property while contamination (everything from grease, oil and chemicals to viruses and bacteria) can seriously harm users.

Ultrasonics: The ONLY Way to Clean with Confidence

Regardless of the source of the dirt or contamination, AG Ultrasonic Cleaning Systems are designed to accommodate a wide variety of uses in diverse industries. Fast, effective and efficient, our machines will allow you to clean virtually any type of part or component. The following is just a short list of the many different types of items that have been cleaned using our systems.

• Automotive (Car, Truck, Motorcycle) See Video Below
• Aviation (Helicopters, Aircraft and Ground Support)
• Personal Boat & Marine
• Injection Molds
• Restaurants, Bakeries & Kitchens (Oven Filters, Burners, Pots, Pans, Utensils)
• Machines of All Types
• Tools, Nuts, Bolts
• Extrusion and Deburring
• Almost anything made out of metal (ferrous and non-ferrous), plastic, vinyl, and wood.